How do I change a monitor's settings?¶
Owners and Admins of a team change a monitor's settings on its Settings page. Open Monitors, click the monitor, then click Settings at the top. Changes apply from the next check.
The sections, in their order: The monitor, What we check, Basic Auth, Who gets alerts, Check interval, More settings and Stop watching. Each section folds: The monitor is open when the page opens (and The port before it, for a port monitor), and you click a section's title to open or close it. Basic Auth opens by itself while a saved password has its warning off, and Stop watching while the monitor is paused. When a save is refused, the section with the field to correct opens and the field is selected. The fields they share with Add a monitor work the same on both.
When you change something, a bar with Save changes and Cancel stays at the bottom of the screen until you save or cancel. Cancel puts back what was saved. Basic Auth, pausing and deleting have their own buttons.
The monitor¶
The address we check, and what helps your team find the monitor. Each field has its own part below.
Address¶
Address: the page we check, such as https://example.com/shop. To watch another page, change it and save: the
checks start again (the monitor reads Not checked yet until its first result of the new address, at most a
minute plus one check interval later) and its past results stay.
An address already in your list is refused, in its http:// or https:// form. If the name was the old domain
name, it follows the new one; a name you typed stays. A saved Basic Auth password is removed when the new address is
on another domain name, so it is never sent to a site it was not given for: save it again if it still applies.
A port monitor's server and port are under The port (port monitoring). An address
may name a port of a short list.
Name¶
Name: what the monitor is called in Uptime Gorilla. Empty, the list shows the domain name.
Staging¶
This is a staging or test website: marks it as a test website, Staging in the list. A test website usually asks for a password: save it under Basic Auth, and the Basic Auth warning tells you when anyone can open it (how the Basic Auth warning works). All the steps: watch a staging website.
Group¶
Group: the group the monitor is in, such as a customer or a project. Type a name under Or a new group to add a group at once (how groups work).
Server¶
Server: the server the website runs on, such as web-03. When several monitors of one server go down together, you get one email about them (how). The field suggests the server names your other monitors already have, so one server is typed one way.
Tags¶
Tags (optional): words to find monitors by, separated by commas, such as kinsta or wordpress; at most 10, each up to 30 characters. Under the field, Your tags lists the tags your other monitors already have: click one to add it. The same word in other capitals is the same tag. A tag no monitor has any more disappears.
Note¶
Note (optional): for your team only, never shown outside it.
What we check¶
Each check of the monitor with a switch: Uptime opens the address and checks that the page loads. A check that is switched off is not run. Whether a test website still asks for its password is a switch of the Basic Auth section. A switch here applies when you save; the switches on the monitor's page apply at once.
SSL certificate warns before the certificate runs out or stops working. It is on for every https:// address and
saved with Save changes; for an http:// address it is off and says Only for https addresses. Where your plan
does not include it, it is shown switched off with the plan's name and Comes with that plan, Not on sale yet.
How the SSL certificate check works. Domain comes later and is shown switched off with
Coming soon, and with the plan's name as well where your plan does not include the paid checks.
Uptime check¶
A monitor without an uptime check shows the switch Uptime check: "Checks
that the website answers, and looks for your keyword." Switch it on and click Save changes to add it. It is added
switched on, every 5 minutes, and you can change its interval under Check interval afterwards. A paused monitor's
new check starts when you resume the checks. If the website asks for a password and none is saved under Basic
Auth (or its address is http://, where the password is not sent), the switch says so: save the password, or the
check will fail. Switching it back off empties the keyword.
Keyword¶
With a Keyword, the page must also contain that word or phrase, or must not contain it, as you choose under The page must. To stop looking for a keyword, empty the field and save. It is a word or phrase we look for in the page's HTML, not in text a script adds later: words that only appear once the page's JavaScript has run are never found. We read the first 1 MB of the page. When a keyword that must be on the page is not in that part, on a page that is larger or that came compressed in a way we could not read, the result is Keyword not checked: it needs attention and never raises an alert, as we cannot tell. Words near the top of the page are the safest choice. The keyword belongs to the uptime check: on a monitor without one, the field is greyed out and says Switch on the uptime check to look for a keyword. Switch on Uptime check, type the keyword and save both together.
Behind a sign-in page¶
Some websites send every visitor to a sign-in page on another address of their own domain first, for example
kb.example.com to auth.example.com. When the check ends on another host, the monitor's page says so:
Redirected to auth.example.com: we checked that page. The same name with or without www. counts as the
website's own host. If that page asks visitors to sign in, the keyword cannot be found, since the page you meant is
behind it. The monitor then says Behind a sign-in page at auth.example.com., and the place's last result says
Ended on auth.example.com, a sign-in page. It shows as Needs attention, counts as up in your uptime, and sends
no alert: a sign-in page is not a website that is down. An outage that was open closes once the checks find the
sign-in page twice in a row, as with any answer from the website.
We know a sign-in page by its password field, or by an address on another host whose name starts with auth.,
login., sso., accounts. or id., or whose path is /login, /signin, /sign-in, /auth or /oauth, so a
sign-in page drawn by a script is known too. It must be on the website's own domain: example.com, or for
shop.example.co.uk, example.co.uk. A sign-in page on another domain, such as login.other-site.test, is not
yours, so a missing keyword there counts as down, as it would for any page: a website that suddenly sends visitors
somewhere else still alerts you.
What to do: watch a page anyone can open without signing in, or remove the keyword.
With the Basic Auth warning on, a redirect to a sign-in address of the website's own domain,
such as auth.example.com, counts as Basic Auth on.
Basic Auth¶
A staging or test website often asks for a user name and password in the browser before it shows anything. Save them here, so the check gets past it.
- Type the User name and the Password.
- Click Save the password. The section then says Saved for the user name and the name you saved.
On the paid plans, saving a first password on a monitor switches its Basic Auth warning on, and the message says Password saved. The Basic Auth warning is on: we warn you when the website stops asking for it. A warning someone switched off stays off.
Once saved, the User name field shows the saved name, and Saved password shows the password as dots with an eye next to it: click the eye to see the password, and again to hide it. Each time the password is shown, the team's history records who looked, never the password itself. The monitor's page shows the same under About this monitor; others in the team see the user name and Password saved there.
To change the password, type it under New password and save; leave that field empty to keep the saved one, also when you change the user name. Basic Auth is saved with Save the password, not with Save changes. To stop using them, click Remove the password.
The password is only sent over an encrypted connection. For an address that starts with http://, the section says
The password is not sent: the address is not https; use the https:// address instead.
Basic Auth warning¶
Under the password, Warn me when Basic Auth is off: "We check that the website still asks for its password. The monitor checks the page either way." Switch it on: it is saved as soon as you change it, with a message that says so (not with Save changes or Save the password). The monitor is marked Staging (how the Basic Auth warning works).
- Without a saved user name and password the switch is greyed out and says Save the user name and password first.
- For an
http://address, switching it on says Basic Auth is only sent over https. Change the address to https first., and the switch goes back off. - It comes with the paid plans; on the others it is shown switched off with the plan's name. A port monitor has none.
- When the address looks like a live website (the main address, such as
example.com, or one with no word such asstaging,devortestin it), an amber line under the switch says so. It is a warning only; you can still save. - While the warning is on, Pause warnings for 24 hours holds its emails for a day, and Resume warnings ends the pause (pause warnings).
Switch it off, and it is saved at once; there is nothing to type. The monitor's page says "Basic Auth warning switched off by" your name and the date (switch it off).
Who gets alerts¶
Who hears when the monitor is down or needs attention (which emails, and when). The first line of the section says, in one sentence, who gets this monitor's alerts, and follows the switch as you move it.
- Alert email gets every alert of all your monitors, shown here with Always. It is set in your account's Notifications: click Change in Notifications (it opens in a new tab), or, under Manage account, click Notifications and change the Alert email (how). Until an Owner or Admin changes it, it is the account owner's sign-in email; an address still Unconfirmed is shown under it and gets nothing until it is confirmed. Each address is listed once, with where it comes from: Account alert email, Address of the group, or both; an address that is both gets one email each time.
- Group alerts: switch it on to also alert the confirmed addresses of the monitor's group. It is off for a new monitor, so a group hears nothing until you choose so, monitor by monitor. It needs a group, and it goes off when you choose another group: switch it on again if that group should hear too. It is saved with Save changes. Where your plan does not include group alerts, the switch is shown off with the plan's name and Comes with that plan, Not on sale yet.
- The group's addresses are listed under the switch, each with its state and what it means for this monitor, and greyed while it gets nothing from this monitor. Unconfirmed gets nothing until its owner confirms it with the link we email it (how); Send it again beside it sends the link again, at most once a day. An address whose owner clicked Stop these emails says Stopped by its owner with the date, and gets nothing until its owner confirms it again. Confirmed and Consent on file get the monitor's alerts while Group alerts is on. Type an address and click Add, or click Remove beside one; both apply at once, for all the group's monitors. Open the group shows them on the group's page. If you just chose another group, save first to see its addresses.
Check interval¶
The time between two checks, per check. The shorter, the sooner you hear when a website is down. Each check has a slider; its marks go from 30 s to 1 h, and the interval chosen is shown above it, such as Every 5 minutes.
A check that is switched off has no slider: it shows its name and Switched off: switch it on under What we check. Switch it back on under What we check and its slider comes back at the interval it had. Every monitor starts at 5 minutes, whatever your plan.
The steps your plan does not include stay on the slider, each mark with a lock. If you move the slider to one, it goes back at once to the nearest interval your plan allows above it (moving down, to the interval the check already has, when it has a shorter one), and a line under it says why, for example 3-minute checks come with Plus. Paid plans are not on sale yet, so it stays at 5 minutes. When your account moves to a plan whose shortest interval is longer, every check that runs more often is set to that interval, with a line in History (moving to another plan).
| You see | What to do |
|---|---|
| ... checks come with ... | The slider went back to the nearest interval your plan allows; nothing to do. |
| Choose one of the check intervals on the slider. | Move the slider to one of its steps. |
More settings¶
Folded until you open it, per check: what counts as up, whether we follow redirects, how long we wait, the method and maintenance.
- Method:
GETreads the page;HEADonly asks for its headers and cannot look for a keyword. - Maintenance: keeps checking, sends no alerts.
Healthy statuses¶
Healthy when the status is says which statuses count as up. Tick a class, type exact codes, or both:
- the classes 2xx, 3xx, 4xx and 5xx count every status of that hundred, for example 3xx for every redirect;
- Exact codes: single statuses, for example
200, 301.
A class and exact codes together count both, for example 3xx with 418. Neither: any 2xx status.
| You see | What to do |
|---|---|
| Type statuses from 100 to 599, separated by commas, such as 200, 301. | Fix Exact codes, or empty it. |
Follow redirects¶
The switch's line says it in short: "On: we check the page a redirect leads to, unless 3xx is ticked. Off: the redirect is the answer; tick 3xx to count it as up."
On (the default), we follow a redirect to the page it points to and check that page. When the check ends on another host, the monitor's page says where: Redirected to example.org: we checked that page.
Off, a redirect is the answer itself: its status is checked against Healthy when the status is. Tick 3xx, or
type the code, such as 301, when the redirect is what you expect.
With 3xx ticked, or a redirect's code typed under Exact codes, a redirect is the answer even when Follow redirects is on: it is what you said counts as up, so we stop there.
Gives up after¶
How long we wait for an answer, from 5 to 60 seconds, with the seconds shown beside the slider. A new monitor waits 30 seconds; one added before 8 November 2026 keeps its time, even outside 5 to 60 seconds, until you change it. Such a time is said under the slider: Set to 10 seconds before the slider; moving it changes the time. The time is never longer than the check interval.
| You see | What to do |
|---|---|
| Choose from 5 to 60 seconds. | Move Gives up after between 5 and 60 seconds. |
| Choose at most ..., the check interval. | Choose a shorter time, or a longer check interval. |
Stop watching¶
Pause checks stops the checks while a website is moved or rebuilt. A reason, if you type one, is shown on the monitor's page, so the rest of the team knows why. Resume checks starts them again. A monitor paused because no sign-in email was confirmed resumes by itself once one is; until then its page says so in place of Resume checks. A monitor that waits for our review (many free accounts already watch that site, so we check it is yours to watch) runs once we have looked at it, within a day. The monitor's page also has both under Quick actions.
To delete the monitor, type its address exactly as shown, then click Delete monitor. It moves to Deleted on the Monitors list: its checks stop, and you can restore it for 7 days, as it was. After 7 days it is deleted for good, with its results. See Deleted monitors.